Sound Forge Pro 10.0a Build 425

Introduction:
Sound Forge Pro software of Sony is known as one editor sound professional and most comprehensive. This article will guide you to do some audio processing tasks fundamental to the latest version.
Technology Guide:
Extract music from Audio CD

First, you put Audio CD into the optical drive. Next, from the interface of the Sony Sound Forge Pro 10 you to the form menu Extract Audio CD program and wait a moment to read the disk.



In the dialog that opens, you can browse through the tracks in the Play button on the right (click the Stop button to stop play). Next check the tracks to extract the hard drive (using Ctrl + left mouse button) and click OK to program implementation.
Forums advanced the process to extract music shows through the status bar below. Each finished tracks will be deducted in a card form the bottom Extract from CD 1-Track 1, Extract from CD 2-Track 2, Extract from CD 3 Track 3 ...
You turn click on the card, then go to File menu> Save As (or press Alt + F2) to store music files on the hard disk. In the dialog that opens, you click the Save as type box and select the format for music files (supports most formats most commonly used, the default is wav). Here, I choose mp3.

You click the box next to the Template and select the sound quality for music files or other resources to keep quality as the default (Default template). Custom button set for your own bitrate, sample rate, audio quality, audio channels for music files ... destination. Complete save the file folder, file name and click Save to save.

Note: to play a card containing music, go to menu File> Close (or press Ctrl + W).

Cut, split a piece of music

You go to menu File> Open (or press Ctrl + O) and find music files to choose processors (supports most formats most commonly used). In a moment, the content of music files will be expressed as a graph with two-channel audio song left (region 1 above) and right (region 2 below).

+ Remove a piece of music: You press the Play button above to hear the band, and locate the beginning and end of the music, to remove the file from the original music. Next in the first, dragging you to the bottom border line starting point, click and drag to the right to the end of the music to remove then pull down compensation so that the target is always green in the second.

You look at the status bar bottom right corner to see the beginning and end were not accurate. Finally right-click and select Cut (or press Ctrl + X) from the drop to remove.
+ Split a piece of music: In the case of a split from the original music files to ringtones, you also perform operation check the time and the end of the music above, then right click and selects Trim / Crop (or press Ctrl + T).

Note: when to back operation has done wrong, you press Ctrl + Z.

Complete your File menu> Save As (or press Alt + F2) to store music files or just cut the music format has separate preferences.

Connecting two music files

Your File menu> Open and select the file in turn to find music to connect. After that you open the card contains the first music file, press Ctrl + A to highlight all the music and then right click and select Copy (or press Ctrl + C) to copy.

Next you switch card containing music files second, right-click on the same side to take command and select Paste (or press Ctrl + P) to voice the music files Monday. Connecting music files so Monday has finished then the music files first.

If you want to connect the first type of music files to play music files first then second, you right-click on the take with the left and select Paste (or press Ctrl + P).

Finally, from Monday card containing music files, you with the menu File> Save As (or press Alt + F2) to save the music files just connected.

Download :http://www.mediafire.com/download.php?tzvmikoldoz